Package jakarta.persistence

Interface StoredProcedureQuery

All Superinterfaces:
Query
public interface StoredProcedureQuery extends Query
Interface used to control stored procedure query execution.

Stored procedure query execution may be controlled in accordance with the following:

  • The setParameter(jakarta.persistence.Parameter<T>, T) methods are used to set the values of all required IN and INOUT parameters. It is not required to set the values of stored procedure parameters for which default values have been defined by the stored procedure.
  • When getResultList() and getSingleResult() are called on a StoredProcedureQuery object, the provider calls execute() on an unexecuted stored procedure query before processing getResultList or getSingleResult.
  • When executeUpdate() is called on a StoredProcedureQuery object, the provider will call execute() on an unexecuted stored procedure query, followed by getUpdateCount(). The results of executeUpdate will be those of getUpdateCount.
  • The execute() method supports both the simple case where scalar results are passed back only via INOUT and OUT parameters as well as the most general case (multiple result sets and/or update counts, possibly also in combination with output parameter values).
  • The execute method returns true if the first result is a result set, and false if it is an update count or there are no results other than through INOUT and OUT parameters, if any.
  • If the execute method returns true, the pending result set can be obtained by calling getResultList() or getSingleResult().
  • The hasMoreResults() method can then be used to test for further results.
  • If execute or hasMoreResults returns false, the getUpdateCount() method can be called to obtain the pending result if it is an update count. The getUpdateCount method will return either the update count (zero or greater) or -1 if there is no update count (i.e., either the next result is a result set or there is no next update count).
  • For portability, results that correspond to JDBC result sets and update counts need to be processed before the values of any INOUT or OUT parameters are extracted.
  • After results returned through getResultList() and getUpdateCount() have been exhausted, results returned through INOUT and OUT parameters can be retrieved.
  • The getOutputParameterValue(int) methods are used to retrieve the values passed back from the procedure through INOUT and OUT parameters.
  • When using REF_CURSOR parameters for result sets the update counts should be exhausted before calling getResultList() to retrieve the result set. Alternatively, the REF_CURSOR result set can be retrieved through getOutputParameterValue(int). Result set mappings are applied to results corresponding to REF_CURSOR parameters in the order the REF_CURSOR parameters were registered with the query.
  • In the simplest case, where results are returned only via INOUT and OUT parameters, execute can be followed immediately by calls to getOutputParameterValue(int).
Since:
2.1
See Also:

  • Method Details

    • setHint

      StoredProcedureQuery setHint(String hintName, Object value)
      Set a query property or hint. The hints elements may be used to specify query properties and hints. Properties defined by this specification must be observed by the provider. Vendor-specific hints that are not recognized by a provider must be silently ignored. Portable applications should not rely on the standard timeout hint. Depending on the database in use, this hint may or may not be observed.
      Specified by:
      setHint in interface Query
      Parameters:
      hintName - name of the property or hint
      value - value for the property or hint
      Returns:
      the same query instance
      Throws:
      IllegalArgumentException - if the second argument is not valid for the implementation

    • setParameter

      <T> StoredProcedureQuery setParameter(Parameter<T> param, T value)
      Bind the value of a Parameter object.
      Specified by:
      setParameter in interface Query
      Parameters:
      param - parameter object
      value - parameter value
      Returns:
      the same query instance
      Throws:
      IllegalArgumentException - if the parameter does not correspond to a parameter of the query

    • setParameter

      @Deprecated(since="3.2") StoredProcedureQuery setParameter(Parameter<Calendar> param, Calendar value, TemporalType temporalType)
      Deprecated.
      Newly-written code should use the date/time types defined in java.time.
      Bind an instance of Calendar to a Parameter object.
      Specified by:
      setParameter in interface Query
      Parameters:
      param - parameter object
      value - parameter value
      temporalType - temporal type
      Returns:
      the same query instance
      Throws:
      IllegalArgumentException - if the parameter does not correspond to a parameter of the query

    • setParameter

      @Deprecated(since="3.2") StoredProcedureQuery setParameter(Parameter<Date> param, Date value, TemporalType temporalType)
      Deprecated.
      Newly-written code should use the date/time types defined in java.time.
      Bind an instance of Date to a Parameter object.
      Specified by:
      setParameter in interface Query
      Parameters:
      param - parameter object
      value - parameter value
      temporalType - temporal type
      Returns:
      the same query instance
      Throws:
      IllegalArgumentException - if the parameter does not correspond to a parameter of the query

    • setParameter

      StoredProcedureQuery setParameter(String name, Object value)
      Bind an argument value to a named parameter.
      Specified by:
      setParameter in interface Query
      Parameters:
      name - parameter name
      value - parameter value
      Returns:
      the same query instance
      Throws:
      IllegalArgumentException - if the parameter name does not correspond to a parameter of the query or if the argument is of incorrect type

    • setParameter

      @Deprecated(since="3.2") StoredProcedureQuery setParameter(String name, Calendar value, TemporalType temporalType)
      Deprecated.
      Newly-written code should use the date/time types defined in java.time.
      Bind an instance of java.util.Calendar to a named parameter.
      Specified by:
      setParameter in interface Query
      Parameters:
      name - parameter name
      value - parameter value
      temporalType - temporal type
      Returns:
      the same query instance
      Throws:
      IllegalArgumentException - if the parameter name does not correspond to a parameter of the query or if the value argument is of incorrect type

    • setParameter

      @Deprecated(since="3.2") StoredProcedureQuery setParameter(String name, Date value, TemporalType temporalType)
      Deprecated.
      Newly-written code should use the date/time types defined in java.time.
      Bind an instance of java.util.Date to a named parameter.
      Specified by:
      setParameter in interface Query
      Parameters:
      name - parameter name
      value - parameter value
      temporalType - temporal type
      Returns:
      the same query instance
      Throws:
      IllegalArgumentException - if the parameter name does not correspond to a parameter of the query or if the value argument is of incorrect type

    • setParameter

      StoredProcedureQuery setParameter(int position, Object value)
      Bind an argument value to a positional parameter.
      Specified by:
      setParameter in interface Query
      Parameters:
      position - position
      value - parameter value
      Returns:
      the same query instance
      Throws:
      IllegalArgumentException - if position does not correspond to a positional parameter of the query or if the argument is of incorrect type

    • setParameter

      @Deprecated(since="3.2") StoredProcedureQuery setParameter(int position, Calendar value, TemporalType temporalType)
      Deprecated.
      Newly-written code should use the date/time types defined in java.time.
      Bind an instance of java.util.Calendar to a positional parameter.
      Specified by:
      setParameter in interface Query
      Parameters:
      position - position
      value - parameter value
      temporalType - temporal type
      Returns:
      the same query instance
      Throws:
      IllegalArgumentException - if position does not correspond to a positional parameter of the query or if the value argument is of incorrect type

    • setParameter

      @Deprecated(since="3.2") StoredProcedureQuery setParameter(int position, Date value, TemporalType temporalType)
      Deprecated.
      Newly-written code should use the date/time types defined in java.time.
      Bind an instance of java.util.Date to a positional parameter.
      Specified by:
      setParameter in interface Query
      Parameters:
      position - position
      value - parameter value
      temporalType - temporal type
      Returns:
      the same query instance
      Throws:
      IllegalArgumentException - if position does not correspond to a positional parameter of the query or if the value argument is of incorrect type

    • setFlushMode

      StoredProcedureQuery setFlushMode(FlushModeType flushMode)
      Set the flush mode type to be used for the query execution. The flush mode type applies to the query regardless of the flush mode type in use for the entity manager.
      Specified by:
      setFlushMode in interface Query
      Parameters:
      flushMode - flush mode
      Returns:
      the same query instance

    • setCacheRetrieveMode

      StoredProcedureQuery setCacheRetrieveMode(CacheRetrieveMode cacheRetrieveMode)
      Set the cache retrieval mode that is in effect during query execution. This cache retrieval mode overrides the cache retrieve mode in use by the entity manager.
      Specified by:
      setCacheRetrieveMode in interface Query
      Parameters:
      cacheRetrieveMode - cache retrieval mode
      Returns:
      the same query instance
      Since:
      3.2

    • setCacheStoreMode

      StoredProcedureQuery setCacheStoreMode(CacheStoreMode cacheStoreMode)
      Set the cache storage mode that is in effect during query execution. This cache storage mode overrides the cache storage mode in use by the entity manager.
      Specified by:
      setCacheStoreMode in interface Query
      Parameters:
      cacheStoreMode - cache storage mode
      Returns:
      the same query instance
      Since:
      3.2

    • setTimeout

      StoredProcedureQuery setTimeout(Integer timeout)
      Set the query timeout, in milliseconds. This is a hint, and is an alternative to setting the hint jakarta.persistence.query.timeout.
      Specified by:
      setTimeout in interface Query
      Parameters:
      timeout - the timeout, in milliseconds, or null to indicate no timeout
      Returns:
      the same query instance
      Since:
      3.2

    • registerStoredProcedureParameter

      StoredProcedureQuery registerStoredProcedureParameter(int position, Class<?> type, ParameterMode mode)
      Register a positional parameter. All parameters must be registered.
      Parameters:
      position - parameter position
      type - type of the parameter
      mode - parameter mode
      Returns:
      the same query instance

    • registerStoredProcedureParameter

      StoredProcedureQuery registerStoredProcedureParameter(String parameterName, Class<?> type, ParameterMode mode)
      Register a named parameter.
      Parameters:
      parameterName - name of the parameter as registered or specified in metadata
      type - type of the parameter
      mode - parameter mode
      Returns:
      the same query instance

    • getOutputParameterValue

      Object getOutputParameterValue(int position)
      Retrieve a value passed back from the procedure through an INOUT or OUT parameter. For portability, all results corresponding to result sets and update counts must be retrieved before the values of output parameters.
      Parameters:
      position - parameter position
      Returns:
      the result that is passed back through the parameter
      Throws:
      IllegalArgumentException - if the position does not correspond to a parameter of the query or is not an INOUT or OUT parameter

    • getOutputParameterValue

      Object getOutputParameterValue(String parameterName)
      Retrieve a value passed back from the procedure through an INOUT or OUT parameter. For portability, all results corresponding to result sets and update counts must be retrieved before the values of output parameters.
      Parameters:
      parameterName - name of the parameter as registered or specified in metadata
      Returns:
      the result that is passed back through the parameter
      Throws:
      IllegalArgumentException - if the parameter name does not correspond to a parameter of the query or is not an INOUT or OUT parameter

    • execute

      boolean execute()
      Return true if the first result corresponds to a result set, and false if it is an update count or if there are no results other than through INOUT and OUT parameters, if any.
      Returns:
      true if first result corresponds to result set
      Throws:
      QueryTimeoutException - if the query execution exceeds the query timeout value set and only the statement is rolled back
      PersistenceException - if the query execution exceeds the query timeout value set and the transaction is rolled back

    • executeUpdate

      int executeUpdate()
      Return the update count of -1 if there is no pending result or if the first result is not an update count. The provider will call execute on the query if needed.
      Specified by:
      executeUpdate in interface Query
      Returns:
      the update count or -1 if there is no pending result or if the next result is not an update count.
      Throws:
      TransactionRequiredException - if there is no transaction or the persistence context has not been joined to the transaction
      QueryTimeoutException - if the statement execution exceeds the query timeout value set and only the statement is rolled back
      PersistenceException - if the query execution exceeds the query timeout value set and the transaction is rolled back

    • getResultList

      List getResultList()
      Retrieve the list of results from the next result set. The provider will call execute on the query if needed. A REF_CURSOR result set, if any, is retrieved in the order the REF_CURSOR parameter was registered with the query.
      Specified by:
      getResultList in interface Query
      Returns:
      a list of the results or null is the next item is not a result set
      Throws:
      QueryTimeoutException - if the query execution exceeds the query timeout value set and only the statement is rolled back
      PersistenceException - if the query execution exceeds the query timeout value set and the transaction is rolled back

    • getSingleResult

      Object getSingleResult()
      Retrieve a single result from the next result set. The provider will call execute on the query if needed. A REF_CURSOR result set, if any, is retrieved in the order the REF_CURSOR parameter was registered with the query.
      Specified by:
      getSingleResult in interface Query
      Returns:
      the result or null if the next item is not a result set
      Throws:
      NoResultException - if there is no result in the next result set
      NonUniqueResultException - if more than one result
      QueryTimeoutException - if the query execution exceeds the query timeout value set and only the statement is rolled back
      PersistenceException - if the query execution exceeds the query timeout value set and the transaction is rolled back

    • getSingleResultOrNull

      Object getSingleResultOrNull()
      Retrieve a single result from the next result set. The provider will call execute on the query if needed. A REF_CURSOR result set, if any, is retrieved in the order the REF_CURSOR parameter was registered with the query.
      Specified by:
      getSingleResultOrNull in interface Query
      Returns:
      the result or null if the next item is not a result set or if there is no result in the next result set
      Throws:
      NonUniqueResultException - if more than one result
      QueryTimeoutException - if the query execution exceeds the query timeout value set and only the statement is rolled back
      PersistenceException - if the query execution exceeds the query timeout value set and the transaction is rolled back

    • hasMoreResults

      boolean hasMoreResults()
      Return true if the next result corresponds to a result set, and false if it is an update count or if there are no results other than through INOUT and OUT parameters, if any.
      Returns:
      true if next result corresponds to result set
      Throws:
      QueryTimeoutException - if the query execution exceeds the query timeout value set and only the statement is rolled back
      PersistenceException - if the query execution exceeds the query timeout value set and the transaction is rolled back

    • getUpdateCount

      int getUpdateCount()
      Return the update count or -1 if there is no pending result or if the next result is not an update count.
      Returns:
      update count or -1 if there is no pending result or if the next result is not an update count
      Throws:
      QueryTimeoutException - if the query execution exceeds the query timeout value set and only the statement is rolled back
      PersistenceException - if the query execution exceeds the query timeout value set and the transaction is rolled back